V Belts

V Belts
V Belts V Belts V Belts V Belts

Australian Crushing & Mining Supplies V Belts

POWERMAKE
Classic V belts (enveloped)
POWERMAKE V belts are produced under the most rigorous quality control, which guarantees long life span and resistance to oil. REXON keeps an inventory of a variety of lengths of the following profiles:
A (15 to 237 inches); B(22 to 159 inches); C (39 to 480 inches); D (75 to 660 inches) and E (144 to 660 inches). Other lengths can be ordered and will be promptly produced and distributed.

POWERMAKE "D"
Classic V belts (toothed)
Produced from special raw material, POWERMAKE "D" belts offer the best pulley-belt adjustment, allowing smaller curvature radiuses and helping in the dissipation of heat generated by the transmission system itself Systems that already use POWERMAKE belts do not need to be altered for the use of POWERMAKE "D" REXON keeps in inventory a varied set of lengths of the following profiles: AX (22 to 122 inches); BX (28 to 120 inches) and CX (51 to 120 inches). Lengths that are not in our inventory, as well as the DX line, can be made to order.

 
HIGHT V and METRIC LINE
V belts (trimmed edge)
Produced for transmission systems that operate in limited space, high rotation transmissions and powerful engines. These are belts that are smaller than the conventional ones. HIGHT V line complies with American standards (RMA MPTA) with the following belts: 3V/5V/8V (in inches) and the METRIC LINE complies with European standards with the following belts: SPZISPA/SPB/SPC (metric).

 
HIGHT V "D" and METRIC LINE "D"
Dented V belts (trimmed edge)
Produced from special raw material, POWERMAKE "D" belts offer the best pulley belt adjustment, allowing smaller curvature radiuses, helping in the dissipation of heat generated by the transmission system itself and reducing the systems weight. Systems that already use HIGHT V and METRIC LINE belts do not need to be altered for the use of HIGHT V "D" and METRIC LINE "D" BELTS. REXON keeps in inventory a varied set of lengths of the following profiles: 3VX (25 to 140 inches); 5VX (50 to 224 inches); 8VX (100 to 212 inches), SPZX (643 to 3563 mm); SPAX (750 to 3768 mm) and SPBX (1250 to 4000 mm). Lengths that are not in our inventory, as well as the SPCX line, can be made to order.

 
MACHINE POWER
Fractional belts
Produced according to American RMA-MPTA standards, MACHINE POWER belts solve the problems of reduced space transmission and high curvature radiuses. They offer a small arch of contact with the pulley, reduction of diameter and they eliminate the need for pre-tensioning. REXON keeps an inventory of a varied set of lengths of the following profiles: 3L (11 to 74 inches); 4L (15 to 100 inches) and 5L (23 to 100 inches). Lengths that are not in our inventory can be made to order.

 
TORK-BAND
V belts with intermediate layer
A special layer, resulting in systems with up to 20 ridges unites TORK-BAND belts. They are produced in A, B, C, D profiles (TORK-BAND POWERMAKE) and 3V, 5V and 8V (TORK-BAND HEIGHT-V that allow equalized wear out in the system and reduction of vibration. REXON keeps in inventory a varied set of lengths of the following profiles: A (60 to 237 inches; B (60 to 315 inches); C (76 to 420 inches); D (90 to 600 inches); 3V (60 to 140 inches); 5V (67 to 355 inches) and 8V (100 to 500 inches). Lengths that are not in our inventory can be made to order.

 
W LINE
Double V hexagonal belts
Double V hexagonal belts meet the needs of parallel axis systems, offering flexibility in the longitudinal direction and rigidity in the transversal direction. REXON keeps in inventory a variety of lengths of the following profiles: AA (51 to 128 inches); BB (43 to 300 inches) and CC (81 to 420 inches). Lengths that are not in inventory can be made to order.

 
POLIRIB
Poli-V belts
POLIRIB belts are cutting edge products that allow a great reduction of the space required by the transmission system, smaller pulleys and high speeds and uniform weight distribution in the belts width. They can be produced in rubber or PU with tensile cords in kevlar, glass fiber or steel. REXON keeps in inventory a variety of lengths of the following profiles: PH/H, PJ/J, PK/K and PL/L. Lengths or materials that are not in inventory as well as the PM/M line can be made to order.